Quick answer
How do I share a VPN server with my family?
Here is how to share a VPN with family: give every device its own WireGuard peer, or every person their own Outline access key, on one TunnelVPS server. Name each entry, set data limits where the tool allows, and revoke a lost phone by deleting only its peer or key. A Home plan carries 5 TB a month.
In brief
- WireGuard: one
[Peer]and one/32address per device, never one file for many. - Outline: one access key per person, with an optional data limit.
- Revoke: delete one peer or one key; everyone else stays connected.
- Size: count devices and monthly traffic, then pick the plan.
What are the steps to share one server?
| Step | Where | What to do |
|---|---|---|
| 1 | Paper or notes | List each person and device, and give each a short name. |
| 2 | Server or Outline Manager | Create one WireGuard peer per device, or one Outline key per person. |
| 3 | Each device | Send the QR code, config file or access key through a private channel. |
| 4 | Server or Outline Manager | Set data limits on Outline keys if needed; note each WireGuard address. |
| 5 | Once a month | Check traffic per peer or key, and remove what is no longer used. |
Why not give everyone the same config file?
Because a shared file means one peer, and WireGuard keeps one current endpoint per peer. Two phones with the same key keep taking the connection from each other. You also lose the ability to cut off one device.
Separate entries cost nothing, and they are the core of how to share a VPN with family safely. They keep the server list readable and make traffic per device visible in wg show. The add a device guide shows the exact steps for each new peer.
Which is easier for family members: WireGuard or Outline?
Outline is easier for people who will not read a guide; WireGuard is lighter on the server. With Outline, each person installs the app and pastes one key. The owner manages keys from the Manager desktop app. With WireGuard, each phone scans a QR code once.
Both can run on one server. One option: WireGuard for phones and laptops, and Outline for a relative on a filtered network. The Outline setup guide covers keys and limits.
[Peer]
# anna-phone
PublicKey = <ANNA_PHONE_PUBLIC_KEY>
AllowedIPs = 10.8.0.2/32
[Peer]
# anna-laptop
PublicKey = <ANNA_LAPTOP_PUBLIC_KEY>
AllowedIPs = 10.8.0.3/32
[Peer]
# leo-phone
PublicKey = <LEO_PHONE_PUBLIC_KEY>
AllowedIPs = 10.8.0.4/32How do you revoke access for one person?
On WireGuard, remove the peer live and delete its block; on Outline, delete the key in the Manager. For WireGuard, wg set wg0 peer <KEY> remove cuts the device at once. Then delete the block from wg0.conf so it does not come back at the next restart.
Knowing how to share a VPN with family includes knowing how to stop sharing. A stolen phone, a guest who left, or an old laptop sold on: each should lose access the same day.
wg set wg0 peer <LEO_PHONE_PUBLIC_KEY> remove
# then delete the "# leo-phone" block from /etc/wireguard/wg0.conf
wg show wg0Which plan suits a family VPN?
Home is sized for a household: every phone, laptop and the router. It has 3 shared vCPU, 4 GB RAM, 60 GB NVMe, 5 TB a month, for $6.37 a month on 12 months. Solo (2 TB a month) suits one person; Duo suits two.
Traffic is the usual limit, not devices. TunnelVPS sets no device limit. Video calls and streaming use the most data. The traffic estimate page gives a monthly figure by use, and the family VPS page compares plans.
What should family members know before they connect?
That the VPN hides traffic from the café Wi-Fi and the internet provider, not from the sites they visit. A personal VPN hides traffic from the local network and the internet provider, not from the sites visited: every connection leaves through one IP address rented by one account, so it is a private tunnel, not anonymity.
Everyone shares the server's one IPv4 address. A site that bans that address bans the whole family. TunnelVPS read the Outline get-started page on 16 November 2026: each key can carry its own data limit, which keeps one heavy user from using up the month.
Family sharing questions
How many family members can share one VPN server?
TunnelVPS sets no limit. CPU, the monthly traffic allowance and the shared 1 Gbit/s port set the practical limit.
What is the best way to share a VPN with family in 2026?
One peer or key per device or person on a server you control, with WireGuard for most and Outline for non-technical users.
Can I see how much each person uses?
Yes. wg show lists bytes received and sent per peer. The Outline Manager can cap each key with a data limit.
Can family members in other countries use the server?
Yes, from anywhere with internet access. Pick the city closest to most of them for lower delay.
Does each family member get a different IP address?
No. All traffic leaves through the server's one IPv4 address and its IPv6 range.
Verdict
- One entry per device or person makes sharing and revoking simple.
- Home covers most households; watch traffic, not device count.
Sources (3)
- wg(8) manual page — man7.org (read 2026-11-16)
- Outline: get started — Outline Foundation (read 2026-11-16)
- WireGuard: Quick Start — WireGuard (read 2026-11-16)
One server for the whole family
Home: 3 shared vCPU, 4 GB RAM, 60 GB NVMe, 5 TB a month, at $6.37 a month on 12 months.
- Built by a person, 1 hour at most after confirmation
- Lost days credited back if a server cannot be delivered
- Pay in BTC, XMR, USDT, USDC, ETH, SOL or LTC
- DomaineGoat LLC · Panama