Your own VPN server · WireGuard, Outline, AmneziaWG · 6 cities · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Language: English
Get a VPN server

Device guide · OpenWrt and GL.iNet routers

How do I put a whole home network on WireGuard?

A router running WireGuard sends every device in the house through the TunnelVPS server, including televisions and consoles that cannot run a VPN app.

Last updated: · 4 min read

Quick answer

How do I put a whole home network on WireGuard?

Load the router's own .conf file from the TunnelVPS server into its WireGuard client. On OpenWrt the package installs with opkg install wireguard; on GL.iNet firmware 4.7 and later, the admin panel imports the file under VPN, then WireGuard Client. Every device on the home network then uses the tunnel, with no app on each one.

In brief
  • OpenWrt: opkg install wireguard, as wireguard.com lists it.
  • GL.iNet: VPN, WireGuard Client, Add Manually, upload or paste the file, Apply.
  • One peer: the router counts as one device on the server.
  • Traffic: a whole household uses more; size the plan by traffic.

What are the steps on a GL.iNet router?

Importing a TunnelVPS WireGuard file on a GL.iNet router (firmware 4.7 and later), from GL.iNet's documentation read 16 November 2026
StepWhereWhat to do
1TunnelVPS serverAdd a [Peer] for the router and write its client file.
2GL.iNet admin panelOpen VPN, then WireGuard Client.
3WireGuard ClientChoose Add Manually and name the group.
4WireGuard ClientUpload the .conf file or paste its text, then Apply.
5WireGuard ClientStart the configuration; a green dot shows the connection.

Why run WireGuard on the router instead of on each device?

One tunnel then covers devices that cannot run a VPN app: televisions, consoles, speakers and smart-home hubs. It also means guests and family members are covered without installing anything. The cost is flexibility: every device shares the same exit city, and a device that should go direct needs a routing rule on the router.

How do I set it up on OpenWrt?

Install the WireGuard package, then add a WireGuard interface with the router's keys and the TunnelVPS server as its peer. wireguard.com lists opkg install wireguard for OpenWrt. The interface settings take the same values as the client file: private key, tunnel address, the server's public key and Endpoint. The OpenWrt client guide itself could not be read on 16 November 2026, so TunnelVPS does not repeat its menu names here; follow the documentation of the firmware version on the router.

Install WireGuard on an OpenWrt router (from wireguard.com)
opkg update
opkg install wireguard

What should I check before putting a whole home on the tunnel?

Check the router's CPU, the plan's monthly traffic and which services dislike data-centre addresses. An older router may not encrypt fast enough to fill a fibre line. A household streaming on several televisions can pass a terabyte a month, so the traffic guide helps size the plan. Geolocation databases decide on their own where a data-centre IP address sits, and streaming or banking sites may treat a data-centre address differently from a home one; TunnelVPS makes no promise about either.

Which other VPN apps run on a router?

TunnelVPS read the WireGuard, Outline and Amnezia pages on 16 November 2026: WireGuard lists an OpenWrt package, and GL.iNet documents its own WireGuard client; Outline and AmneziaVPN list no router app, so phones that need them keep their own app. Each app talks to the same TunnelVPS server, so one server can serve WireGuard to most devices and a second protocol to the one that needs it. The Outline VPS page and the AmneziaWG VPS page explain how each is installed on the server side.

Which TunnelVPS plan suits a whole home network?

Home ($6.37 a month on 12 months) suits most households; Crew (5 TB) and Fleet (6 TB) suit heavy streaming. Every plan has one IPv4 address, an IPv6 /64 and a monthly traffic allowance, and costs the same in all six cities. Solo, Duo and Home start at 3 months. The pricing page shows each rental length, and the traffic guide estimates a month of use by device.

Router questions

Does a GL.iNet router take a QR code?

The GL.iNet documentation read on 16 November 2026 describes uploading a file or pasting the configuration; it does not mention a QR code.

Can phones still use their own tunnel when away from home?

Yes. Give each phone its own peer on the server. At home the router covers them; away, their own app does.

Does the router need a fixed IP address?

No. The router connects out to the TunnelVPS server, so the home connection can change address.

Can one device skip the tunnel?

Yes, with a routing rule on the router. The menu depends on the firmware.

Verdict
  • A WireGuard router is the way to cover televisions and consoles that cannot run a VPN app.
  • Size by traffic: Home for most households, Crew or Fleet for heavy streaming.
Sources (3)
  1. WireGuard: installation and client apps — WireGuard (read 2026-11-16)
  2. GL.iNet: WireGuard client (firmware 4.7 and later) — GL.iNet (read 2026-11-16)
  3. WireGuard: quick start (keys, peers) — WireGuard (read 2026-11-16)

Get the server first

Home carries 5 TB a month for a whole household, at $6.37 a month on 12 months.

From $2.25/mo on 12 months · no KYC

Get a server