Your own VPN server · WireGuard, Outline, AmneziaWG · 6 cities · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Language: English
Get a VPN server

Guide · wg show and vnStat

How do I monitor WireGuard traffic?

Who is connected and how much each device moved, from wg show; how much the whole server used this month, from vnStat; and how that compares with the plan.

Last updated: · 4 min read

Quick answer

How do I monitor WireGuard traffic?

Here is how to monitor WireGuard traffic: run wg show on the TunnelVPS server to see each peer's latest handshake and bytes received and sent, then install vnStat to count the server's monthly total with vnstat -m. Compare that total with the plan's allowance, from 2 TB on Solo to 6 TB on Fleet.

In brief
  • Per device: wg show wg0 transfer and wg show wg0 latest-handshakes.
  • Script-friendly: wg show wg0 dump prints tab-separated fields.
  • Per month: vnStat keeps daily and monthly totals per interface.
  • Plan: each plan states a monthly outbound allowance in TB.

What are the steps to watch traffic?

Monitoring WireGuard traffic on a TunnelVPS server, 4 steps, from the wg(8) and vnstat(1) manuals
StepWhereWhat to do
1ServerRun wg show wg0 to list peers, handshakes and transfer.
2ServerInstall vnStat with apt install vnstat.
3ServerRead monthly totals with vnstat -i eth0 -m and daily ones with vnstat -i eth0 -d.
4MonthlyCompare the month's outbound total with the plan allowance.

What does wg show tell you?

Each peer's endpoint, allowed IPs, latest handshake and the bytes received and sent. A handshake within the last few minutes means the device is connected. TunnelVPS read the wg manual on 16 November 2026: wg show can print just transfer, latest-handshakes or a tab-separated dump.

The counters cover the life of the interface. They start again from zero when wg0 is restarted. That is fine for a quick look, but a monthly view needs vnStat.

Per-peer view with wg show
wg show wg0
wg show wg0 transfer
wg show wg0 latest-handshakes
wg show wg0 dump

How do you count traffic per month?

With vnStat, whose daemon vnstatd collects and stores totals per interface. vnstat -m lists the last months, vnstat -d the last days, and vnstat -l shows the live rate until stopped. Use -i to pick an interface.

Watch the internet interface, such as eth0, for the server's real total. That includes WireGuard, Outline and everything else. Watching wg0 too shows the WireGuard share. Knowing how to monitor WireGuard traffic this way avoids end-of-month surprises.

Install vnStat and read the totals
apt install vnstat
vnstat -i eth0 -m
vnstat -i eth0 -d 7
vnstat -i wg0 --add
vnstat -i wg0 -l

How much traffic does each plan include?

Monthly outbound traffic allowance of each TunnelVPS plan
PlanTraffic a monthPrice a month on 12 monthsSized for
Solo2 TB$2.25One person
Duo5 TB$5.25Two people
Home5 TB$6.37A household
Crew5 TB$10.12A small team
Fleet6 TB$15.00A busy team

What happens near the monthly allowance?

Nothing is charged automatically. Every server has one dedicated IPv4 address and a routed IPv6 /64. Each plan states its monthly outbound traffic in TB, and going past it never adds an automatic charge. Still, a server close to its allowance each month needs a bigger plan or fewer heavy users.

The traffic estimate page gives typical monthly figures by use. The pricing page lists every plan and rental length.

How do you find the heaviest device?

Compare the bytes sent per peer in the transfer output. Each WireGuard peer has its own counter, which is one more reason to give every device its own key. A peer with a huge total is usually a streaming box or a backup job.

For a shared household, Outline keys can carry data limits. The family sharing guide covers limits and revocation, and is a good next read after learning how to monitor WireGuard traffic.

Traffic monitoring questions

Does wg show count traffic since boot?

Since the interface came up. Restarting wg-quick@wg0 starts the counters again from zero.

What is the best tool to monitor WireGuard traffic in 2026?

wg show for live, per-device numbers and vnStat for monthly totals. Both are in the Debian and Ubuntu repositories.

Which direction counts against the TunnelVPS allowance?

Each plan states its monthly outbound traffic. Read the outbound (tx) column on the internet interface.

Can I see which websites a device visits?

wg show and vnStat count bytes only. They show no destinations, and none are needed to manage traffic.

Does vnStat slow the server down?

Its daemon reads interface counters, a light task even on Solo.

Verdict
  • wg show per device, vnStat per month: two tools cover all of it.
  • Check the outbound total monthly against the plan allowance.
Sources (3)
  1. wg(8) manual page — man7.org (read 2026-11-16)
  2. vnstat(1) manual page — Debian (read 2026-11-16)
  3. Outline: get started (data limits per key) — Outline Foundation (read 2026-11-16)

Room for a household's traffic

Home includes 5 TB a month, at $6.37 a month on 12 months.

From $2.25/mo on 12 months · no KYC

Get a server