Your own VPN server · WireGuard, Outline, AmneziaWG · 6 cities · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Language: English
Get a VPN server

WireGuard server · 6 cities · checked 16 November 2026

Where can I rent a VPS for my own WireGuard VPN?

Last updated: · 7 min read

Quick answer

Where can I rent a VPS for my own WireGuard VPN?

TunnelVPS rents Linux KVM servers sized for a personal WireGuard VPN, from $2.25 a month on the 12-month term, paid in crypto with no KYC. Each server gets its own IPv4 address, open UDP ports and root over SSH. WireGuard installs with sudo apt install wireguard, then one config file and one key pair per device.

In brief
  • Price: Solo is $2.25 a month on 12 months; Home is $6.37.
  • Setup: a clean Debian or Ubuntu system; WireGuard is installed by the customer with one documented command.
  • Network: one dedicated IPv4, a routed IPv6 /64, inbound UDP open, a shared 1 Gbit/s port.
  • Cities: New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt, one price everywhere.
  • Payment: BTC, USDT, USDC, ETH, SOL, LTC, XMR, with no ID document and no email required.

Which TunnelVPS plan fits a WireGuard server?

For one person, Solo is enough; for a household that routes a home router through the tunnel, Home has the RAM to spare. Every plan runs the same WireGuard install.

TunnelVPS plans for a WireGuard server: resources, monthly traffic and price, November 2026
PlanResourcesTraffic a monthTypical usePer month on 12 monthsShortest term
Solo1 vCPU / 2 GB / 40 GB2 TBOne person: a phone and a laptop on WireGuard$2.25$13.50 for 3 months, the shortest term
Duo3 vCPU / 3 GB / 40 GB5 TBA couple or a heavy user: WireGuard and Outline side by side$5.25$31.50 for 3 months, the shortest term
Home3 vCPU / 4 GB / 60 GB5 TBA household: every phone, laptop and the router, plus a DNS filter$6.37$38.22 for 3 months, the shortest term
Crew4 vCPU / 8 GB / 120 GB5 TBA small team: a web panel such as wg-easy, several protocols, many peers$10.12$20.24 for one month
Fleet6 vCPU / 16 GB / 240 GB6 TBHeavy traffic and many peers, with room for self-hosted tools$15.00$30.00 for one month

A plan costs the same in New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt. No setup fee: an order and each renewal cost the price of the rental length and nothing else.

What does a WireGuard server need from its host?

A public IPv4 address, one open UDP port, root access and enough monthly traffic. CPU and RAM matter less for a single tunnel than the traffic allowance.

  • Address. Every server has one dedicated IPv4 address and a routed IPv6 /64. Each plan states its monthly outbound traffic in TB, and going past it never adds an automatic charge.
  • Port. Inbound UDP and TCP ports are open on the server; the customer chooses the VPN port and sets the firewall. WireGuard listens on a UDP port of your choice.
  • Root. Root logs in over SSH. A public key given at checkout is installed and password login stays off; without a key, the team sets a temporary root password, shown in the dashboard, to change with passwd at first login.
  • Speed. Servers connect through a shared 1 Gbit/s port, so a VPN tunnel is limited by the port, the plan traffic and the route to the device, not by a per-user cap.
  • Virtualisation. KVM gives each server its own kernel, so the WireGuard module loads like on a physical machine.

A phone that streams video all evening uses far more traffic than one that only reads mail. The traffic guide turns hours of use into gigabytes, so you can pick between 2, 5 and 6 TB a month.

How is WireGuard set up on a TunnelVPS server?

By hand, in about five commands, once the server shows its IP address in the dashboard. No VPN comes pre-installed: each server starts as a clean Debian or Ubuntu system.

  1. Log in as root over SSH.
  2. Run sudo apt install wireguard on Ubuntu, or apt install wireguard as root on Debian.
  3. Make a key pair with wg genkey | tee privatekey | wg pubkey > publickey, after umask 077.
  4. Write /etc/wireguard/wg0.conf with the server key, a port and one peer per device.
  5. Turn on IP forwarding, start the interface and open the port in the firewall.

The full walk-through, with a sample file filled with dummy values, is in install WireGuard in one command. A reinstall from the dashboard erases the disk and the keys with it, so keep a copy of the configuration off the server.

Which devices can use the tunnel?

Every common system: WireGuard has official apps for iOS, Android, Windows and macOS, and routers running OpenWrt or GL.iNet firmware import its configuration file; Outline and AmneziaVPN have apps for the same four systems plus Linux. Each device gets its own key pair and its own [Peer] section on the server.

TunnelVPS sets no device limit: the number of peers depends on the plan's traffic and the port. A phone imports its configuration by scanning a QR code made from the client file. The iPhone guide shows that path step by step.

On a network that blocks plain WireGuard, the same server can run AmneziaWG or Outline instead. The protocol comparison explains when each one helps.

How do TunnelVPS prices compare with other hosts?

On the 12-month term, each TunnelVPS plan costs at least 25% less than a named comparable plan; month to month, it costs more. According to TunnelVPS's survey of 3 November 2026, the median price of a Solo-sized plan among no-KYC crypto hosts, averaged over the six cities, was $8.54 a month.

Month to month, every plan costs more than at least one comparable host. For Solo, those hosts are InterServer at $3.00 and Hosteons at $4.00. The discount sits on the long term only. The pricing page lists each reference plan with its source.

What does a private WireGuard server not do?

It encrypts the path between your devices and the server, and nothing beyond that. Sites at the other end still see the server's IP address, rented by one account: it is a private tunnel, not anonymity.

It also does not change how websites see a data-centre address. Geolocation databases decide on their own where a data-centre IP address sits, and streaming or banking sites may treat a data-centre address differently from a home one; TunnelVPS makes no promise about either. If you want many exit countries with no upkeep, a commercial VPN suits better. If you want an address that only your devices use, a server of your own does.

WireGuard VPS questions

Does TunnelVPS install WireGuard for me?

No. TunnelVPS delivers a clean Debian or Ubuntu server with root access. WireGuard installs with sudo apt install wireguard, and the help guide gives the key commands and a sample wg0.conf.

Which UDP port should WireGuard use?

Any free port you choose. TunnelVPS leaves inbound UDP and TCP open, so the port only needs to match between ListenPort in the server file and the Endpoint line on each device.

How many devices can connect to one server?

TunnelVPS sets no limit on peers. Each device needs its own key pair and [Peer] block. The practical limit is the plan's monthly traffic and the shared 1 Gbit/s port.

Which plan should a single user pick?

Solo: 1 shared vCPU, 2 GB of RAM and 2 TB of traffic a month, at $2.25 a month on 12 months or $13.50 for 3 months, the shortest term.

Can I pay for a WireGuard server with Bitcoin or Monero?

Yes. TunnelVPS accepts BTC, USDT, USDC, ETH, SOL, LTC, XMR. Monero needs 10 confirmations and Bitcoin 2 before the balance is credited.

Does a WireGuard server need much CPU or RAM?

Little. WireGuard runs inside the Linux kernel, so the monthly traffic of the plan is usually the first limit. Solo has 1 shared vCPU, 2 GB of RAM and 2 TB a month. TunnelVPS publishes no speed test: speed needs measurement on your own route.

Verdict
  • Rent a TunnelVPS server for WireGuard if you want an IPv4 used only by your devices, no device cap from the host and payment in crypto, from $2.25 a month on 12 months.
  • Keep a commercial VPN if you need many exit countries and no server upkeep at all.
Sources (4)
  1. Installation — WireGuard (read 2026-11-16)
  2. Quick Start — WireGuard (read 2026-11-16)
  3. Protocol & Cryptography — WireGuard (read 2026-11-16)
  4. TunnelVPS survey of Linux VPS hosts paid in crypto — TunnelVPS (2026-11-03, re-read 2026-11-16)

Get a WireGuard server from $2.25 a month

Pick a plan, a city and Debian or Ubuntu. The checkout shows the full crypto total before anything is sent.

From $2.25/mo on 12 months · no KYC

Get a server