Quick answer
How do I connect my devices to a TunnelVPS server?
Install WireGuard on the TunnelVPS server, create one peer per device, then import each peer into the official app: App Store on iPhone, iPad and Mac, Google Play on Android, an installer on Windows. Routers on OpenWrt or GL.iNet firmware take the same file. TunnelVPS sets no device limit; 5 guides cover each system.
In brief
- Server first: the VPN is installed on the server from the install guide; nothing comes pre-installed.
- One peer per device: each phone, laptop or router has its own key pair and tunnel address.
- Phones scan a QR code made on the server; computers and routers import a
.conffile. - Outline and AmneziaWG have their own apps for the same systems.
Which app does each device need?
| Device | WireGuard | Outline | AmneziaVPN | Guide |
|---|---|---|---|---|
| iPhone, iPad | App Store | Yes (iOS) | Yes (iOS) | iPhone guide |
| Android | Google Play or a direct APK | Yes | Yes | Android guide |
| Windows 10 and 11 | Installer from wireguard.com | Yes | Yes | Windows guide |
| macOS | Mac App Store | Yes | Yes | macOS guide |
| Router | OpenWrt package or GL.iNet panel | No | No | Router guide |
Prices checked on
Which step-by-step how-to guides cover the server?
| Question | Guide |
|---|---|
| How do I add a device to WireGuard? | Add a WireGuard device |
| How do I check a VPN for DNS leaks? | Check for DNS leaks |
| How do I enable IP forwarding for WireGuard? | IP forwarding for WireGuard |
| How do I install AmneziaWG on a VPS? | Install AmneziaWG |
| How do I install wg-easy on a VPS? | Install wg-easy |
| How do I keep a VPS updated? | Keep a VPS updated |
| How do I make a WireGuard QR code for a phone? | WireGuard QR code |
| How do I monitor WireGuard traffic? | Monitor WireGuard traffic |
| How do I open the WireGuard port in UFW? | WireGuard port in UFW |
| How do I secure SSH on a VPS? | Secure SSH |
| How do I set up an Outline VPN server? | Outline VPN server |
| How do I set up my own VPN server? | Set up your own VPN server |
| How do I share a VPN server with my family? | Share a VPN with family |
| How do I set up WireGuard split tunneling? | WireGuard split tunneling |
| How do I set up WireGuard IPv6? | WireGuard IPv6 |
| How do I use WireGuard on Linux? | WireGuard on Linux |
What has to happen on the server before any device connects?
The server needs WireGuard installed, a server key pair, a wg0.conf file and IP forwarding turned on. No VPN comes pre-installed: each server starts as a clean Debian or Ubuntu system. WireGuard installs with one documented command (sudo apt install wireguard), Outline is set up from the Outline Manager desktop app, and AmneziaWG from the AmneziaVPN app over SSH; the TunnelVPS guides walk through each one. A fresh TunnelVPS server arrives as clean Ubuntu or Debian, with root access over SSH. The first SSH login guide gets to the prompt, and the install guide covers the rest in about ten commands.
Once the wg0 interface runs, every new device is two steps: make a key pair for it, and add a [Peer] block with its public key and its own tunnel address.
How does a configuration reach a phone or a laptop?
Phones read a QR code; computers and routers import a small text file. TunnelVPS read the WireGuard install page on 16 November 2026: it lists clients for iOS, Android, Windows and macOS, and an OpenWrt package for routers. The client file holds the device's private key, its tunnel address, the server's public key and the server's IP address and port. On the server, the qrencode package prints that file as a QR code right in the terminal.
The file is a secret: anyone who has it can use the tunnel. Move it over SSH or show it as a QR code, and delete copies that are no longer needed. To remove a lost phone, delete its [Peer] block on the server and reload WireGuard.
apt install qrencode
qrencode -t ansiutf8 < /etc/wireguard/clients/DEVICE.confHow many devices can one TunnelVPS server carry?
TunnelVPS sets no device limit: the plan's vCPU, RAM and monthly traffic set the practical ceiling. WireGuard is light, so even Solo handles a few devices browsing at once. Amnezia recommends 2 vCPU and 2 GB of RAM for 10 or more simultaneous connections, which Duo (3 vCPU / 3 GB / 40 GB) and the larger plans meet. Traffic matters more than CPU for most households: the traffic guide estimates a month of use by device.
Device questions
Can one device use WireGuard and another Outline on the same server?
Yes. The protocols listen on different ports, so a server can run WireGuard for the laptop and Outline or AmneziaWG for a phone on a stricter network. Home and larger plans leave room for both.
Do I need a separate configuration for each device?
Yes. Each device has its own keys and tunnel address, so one can be removed without touching the others. Sharing one file between two devices makes them fight over the same address.
Does TunnelVPS limit how many devices connect?
No. TunnelVPS sets no device limit; the plan's traffic and vCPU are the only ceiling.
Which DNS server should the devices use?
Any resolver the user trusts. The sample files use a public resolver; a DNS filter such as AdGuard Home can also run on the server itself.
Verdict
- Use WireGuard on every device that can: official apps on all four systems and routers.
- Add Outline or AmneziaWG for the one device that faces a network blocking WireGuard.
Sources (5)
- WireGuard: installation and client apps — WireGuard (read 2026-11-16)
- WireGuard: quick start (keys, peers) — WireGuard (read 2026-11-16)
- Outline: get started — Outline Foundation (read 2026-11-16)
- AmneziaVPN client: platforms and protocols — Amnezia (read 2026-11-16)
- GL.iNet: WireGuard client (firmware 4.7 and later) — GL.iNet (read 2026-11-16)
Get the server first
Home carries 5 TB a month for a household, at $6.37 a month on 12 months.
- Built by a person, 1 hour at most after confirmation
- Lost days credited back if a server cannot be delivered
- Pay in BTC, XMR, USDT, USDC, ETH, SOL or LTC
- DomaineGoat LLC · Panama