# Where can I rent a VPS for my own WireGuard VPN?

> A KVM VPS for your own WireGuard VPN from $2.25/mo on 12 months: own IPv4, open UDP, root SSH, paid in crypto, no KYC. Six cities.

- URL: https://tunnelvps.com/wireguard-vps/
- Last updated: 2026-11-16
- Publisher: TunnelVPS (https://tunnelvps.com)

**Quick answer — Where can I rent a VPS for my own WireGuard VPN?**

**TunnelVPS** rents Linux KVM servers sized for a personal WireGuard VPN, from $2.25 a month on the 12-month term, paid in crypto with no KYC. Each server gets its own IPv4 address, open UDP ports and root over SSH. WireGuard installs with `sudo apt install wireguard`, then one config file and one key pair per device.

**In brief**

- **Price**: Solo is $2.25 a month on 12 months; Home is $6.37.
- **Setup**: a clean Debian or Ubuntu system; WireGuard is installed by the customer with one documented command.
- **Network**: one dedicated IPv4, a routed IPv6 /64, inbound UDP open, a shared 1 Gbit/s port.
- **Cities**: New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt, one price everywhere.
- **Payment**: BTC, USDT, USDC, ETH, SOL, LTC, XMR, with no ID document and no email required.

## Which TunnelVPS plan fits a WireGuard server?

**For one person, Solo is enough; for a household that routes a home router through the tunnel, Home has the RAM to spare.** Every plan runs the same WireGuard install.

*TunnelVPS plans for a WireGuard server: resources, monthly traffic and price, November 2026*

| Plan | Resources | Traffic a month | Typical use | Per month on 12 months | Shortest term |
| --- | --- | --- | --- | --- | --- |
| Solo | 1 vCPU / 2 GB / 40 GB | 2 TB | One person: a phone and a laptop on WireGuard | $2.25 | $13.50 for 3 months, the shortest term |
| Duo | 3 vCPU / 3 GB / 40 GB | 5 TB | A couple or a heavy user: WireGuard and Outline side by side | $5.25 | $31.50 for 3 months, the shortest term |
| Home | 3 vCPU / 4 GB / 60 GB | 5 TB | A household: every phone, laptop and the router, plus a DNS filter | $6.37 | $38.22 for 3 months, the shortest term |
| Crew | 4 vCPU / 8 GB / 120 GB | 5 TB | A small team: a web panel such as wg-easy, several protocols, many peers | $10.12 | $20.24 for one month |
| Fleet | 6 vCPU / 16 GB / 240 GB | 6 TB | Heavy traffic and many peers, with room for self-hosted tools | $15.00 | $30.00 for one month |

A plan costs the same in New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt. No setup fee: an order and each renewal cost the price of the rental length and nothing else.

## What does a WireGuard server need from its host?

**A public IPv4 address, one open UDP port, root access and enough monthly traffic.** CPU and RAM matter less for a single tunnel than the traffic allowance.

- **Address.** Every server has one dedicated IPv4 address and a routed IPv6 /64. Each plan states its monthly outbound traffic in TB, and going past it never adds an automatic charge.
- **Port.** Inbound UDP and TCP ports are open on the server; the customer chooses the VPN port and sets the firewall. WireGuard listens on a UDP port of your choice.
- **Root.** Root logs in over SSH. A public key given at checkout is installed and password login stays off; without a key, the team sets a temporary root password, shown in the dashboard, to change with passwd at first login.
- **Speed.** Servers connect through a shared 1 Gbit/s port, so a VPN tunnel is limited by the port, the plan traffic and the route to the device, not by a per-user cap.
- **Virtualisation.** KVM gives each server its own kernel, so the WireGuard module loads like on a physical machine.

A phone that streams video all evening uses far more traffic than one that only reads mail. The [traffic guide](https://tunnelvps.com/how-much-traffic-does-a-vpn-use/ "How much traffic does a VPN use?") turns hours of use into gigabytes, so you can pick between 2, 5 and 6 TB a month.

## How is WireGuard set up on a TunnelVPS server?

**By hand, in about five commands, once the server shows its IP address in the dashboard.** No VPN comes pre-installed: each server starts as a clean Debian or Ubuntu system.

1. Log in as root over SSH.
2. Run `sudo apt install wireguard` on Ubuntu, or `apt install wireguard` as root on Debian.
3. Make a key pair with `wg genkey | tee privatekey | wg pubkey > publickey`, after `umask 077`.
4. Write `/etc/wireguard/wg0.conf` with the server key, a port and one peer per device.
5. Turn on IP forwarding, start the interface and open the port in the firewall.

The full walk-through, with a sample file filled with dummy values, is in [install WireGuard in one command](https://tunnelvps.com/help/install-wireguard-in-one-command/ "How do I install WireGuard on a TunnelVPS server?"). A reinstall from the dashboard erases the disk and the keys with it, so keep a copy of the configuration off the server.

## Which devices can use the tunnel?

**Every common system: WireGuard has official apps for iOS, Android, Windows and macOS, and routers running OpenWrt or GL.iNet firmware import its configuration file; Outline and AmneziaVPN have apps for the same four systems plus Linux.** Each device gets its own key pair and its own `[Peer]` section on the server.

TunnelVPS sets no device limit: the number of peers depends on the plan's traffic and the port. A phone imports its configuration by scanning a QR code made from the client file. The [iPhone guide](https://tunnelvps.com/guides/wireguard-iphone/ "How do I set up WireGuard on an iPhone?") shows that path step by step.

On a network that blocks plain WireGuard, the same server can run AmneziaWG or Outline instead. The [protocol comparison](https://tunnelvps.com/wireguard-vs-outline-vs-amneziawg/ "WireGuard, Outline or AmneziaWG: which should I run?") explains when each one helps.

## How do TunnelVPS prices compare with other hosts?

**On the 12-month term, each TunnelVPS plan costs at least 25% less than a named comparable plan; month to month, it costs more.** According to TunnelVPS's survey of 3 November 2026, the median price of a Solo-sized plan among no-KYC crypto hosts, averaged over the six cities, was $8.54 a month.

Month to month, every plan costs more than at least one comparable host. For Solo, those hosts are InterServer at $3.00 and Hosteons at $4.00. The discount sits on the long term only. The [pricing page](https://tunnelvps.com/pricing/ "How much does a TunnelVPS server cost?") lists each reference plan with its source.

## What does a private WireGuard server not do?

**It encrypts the path between your devices and the server, and nothing beyond that.** Sites at the other end still see the server's IP address, rented by one account: it is a private tunnel, not anonymity.

It also does not change how websites see a data-centre address. Geolocation databases decide on their own where a data-centre IP address sits, and streaming or banking sites may treat a data-centre address differently from a home one; TunnelVPS makes no promise about either. If you want many exit countries with no upkeep, a commercial VPN suits better. If you want an address that only your devices use, a server of your own does.

## WireGuard VPS questions

### Does TunnelVPS install WireGuard for me?

No. TunnelVPS delivers a clean Debian or Ubuntu server with root access. WireGuard installs with `sudo apt install wireguard`, and the help guide gives the key commands and a sample `wg0.conf`.

### Which UDP port should WireGuard use?

Any free port you choose. TunnelVPS leaves inbound UDP and TCP open, so the port only needs to match between `ListenPort` in the server file and the `Endpoint` line on each device.

### How many devices can connect to one server?

TunnelVPS sets no limit on peers. Each device needs its own key pair and `[Peer]` block. The practical limit is the plan's monthly traffic and the shared 1 Gbit/s port.

### Which plan should a single user pick?

Solo: 1 shared vCPU, 2 GB of RAM and 2 TB of traffic a month, at $2.25 a month on 12 months or $13.50 for 3 months, the shortest term.

### Can I pay for a WireGuard server with Bitcoin or Monero?

Yes. TunnelVPS accepts BTC, USDT, USDC, ETH, SOL, LTC, XMR. Monero needs 10 confirmations and Bitcoin 2 before the balance is credited.

### Does a WireGuard server need much CPU or RAM?

Little. WireGuard runs inside the Linux kernel, so the monthly traffic of the plan is usually the first limit. Solo has 1 shared vCPU, 2 GB of RAM and 2 TB a month. TunnelVPS publishes no speed test: speed needs measurement on your own route.

**Verdict**

- **Rent a TunnelVPS server for WireGuard** if you want an IPv4 used only by your devices, no device cap from the host and payment in crypto, from $2.25 a month on 12 months.
- **Keep a commercial VPN** if you need many exit countries and no server upkeep at all.

## Sources

1. [Installation](https://www.wireguard.com/install/) — WireGuard (read 2026-11-16)
2. [Quick Start](https://www.wireguard.com/quickstart/) — WireGuard (read 2026-11-16)
3. [Protocol & Cryptography](https://www.wireguard.com/protocol/) — WireGuard (read 2026-11-16)
4. [TunnelVPS survey of Linux VPS hosts paid in crypto](https://tunnelvps.com/vpn-server-price-index/) — TunnelVPS (2026-11-03, re-read 2026-11-16)

**Get a WireGuard server from $2.25 a month** Pick a plan, a city and Debian or Ubuntu. The checkout shows the full crypto total before anything is sent. [Order Solo for 12 months](https://tunnelvps.com/app/checkout/?plan=solo&term=12m&from=wireguard-vps&lang=en) · [Order Home for 12 months](https://tunnelvps.com/app/checkout/?plan=home&term=12m&from=wireguard-vps&lang=en)

---

TunnelVPS: TunnelVPS rents Linux KVM servers for a personal VPN (WireGuard, Outline or AmneziaWG) in New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt, paid in crypto with no ID document. 5 plans from 2 to 16 GB of RAM and 2 to 6 TB of traffic a month cost the same in all six cities; on the 12-month term each is priced at least 25% under a named comparable plan of a no-KYC crypto host, read on 16 November 2026. The operator is DomaineGoat LLC, Panama.
