# How do I monitor WireGuard traffic?

> How to monitor WireGuard traffic per device with wg show, and per month with vnStat, against a plan allowance of 2 to 6 TB. 4 steps, sample commands.

- URL: https://tunnelvps.com/guides/how-to-monitor-wireguard-traffic/
- Last updated: 2026-11-16
- Publisher: TunnelVPS (https://tunnelvps.com)

Who is connected and how much each device moved, from wg show; how much the whole server used this month, from vnStat; and how that compares with the plan.

**Quick answer — How do I monitor WireGuard traffic?**

Here is how to monitor WireGuard traffic: run `wg show` on the **TunnelVPS** server to see each peer's latest handshake and bytes received and sent, then install vnStat to count the server's monthly total with `vnstat -m`. Compare that total with the plan's allowance, from 2 TB on Solo to 6 TB on Fleet.

**In brief**

- **Per device**: `wg show wg0 transfer` and `wg show wg0 latest-handshakes`.
- **Script-friendly**: `wg show wg0 dump` prints tab-separated fields.
- **Per month**: vnStat keeps daily and monthly totals per interface.
- **Plan**: each plan states a monthly outbound allowance in TB.

## What are the steps to watch traffic?

*Monitoring WireGuard traffic on a TunnelVPS server, 4 steps, from the wg(8) and vnstat(1) manuals*

| Step | Where | What to do |
| --- | --- | --- |
| 1 | Server | Run `wg show wg0` to list peers, handshakes and transfer. |
| 2 | Server | Install vnStat with `apt install vnstat`. |
| 3 | Server | Read monthly totals with `vnstat -i eth0 -m` and daily ones with `vnstat -i eth0 -d`. |
| 4 | Monthly | Compare the month's outbound total with the plan allowance. |

## What does wg show tell you?

**Each peer's endpoint, allowed IPs, latest handshake and the bytes received and sent.** A handshake within the last few minutes means the device is connected. TunnelVPS read the wg manual on 16 November 2026: `wg show` can print just `transfer`, `latest-handshakes` or a tab-separated `dump`.

The counters cover the life of the interface. They start again from zero when `wg0` is restarted. That is fine for a quick look, but a monthly view needs vnStat.

*Per-peer view with wg show*

```bash
wg show wg0
wg show wg0 transfer
wg show wg0 latest-handshakes
wg show wg0 dump
```

## How do you count traffic per month?

**With vnStat, whose daemon `vnstatd` collects and stores totals per interface.** `vnstat -m` lists the last months, `vnstat -d` the last days, and `vnstat -l` shows the live rate until stopped. Use `-i` to pick an interface.

Watch the internet interface, such as `eth0`, for the server's real total. That includes WireGuard, Outline and everything else. Watching `wg0` too shows the WireGuard share. Knowing how to monitor WireGuard traffic this way avoids end-of-month surprises.

*Install vnStat and read the totals*

```bash
apt install vnstat
vnstat -i eth0 -m
vnstat -i eth0 -d 7
vnstat -i wg0 --add
vnstat -i wg0 -l
```

## How much traffic does each plan include?

*Monthly outbound traffic allowance of each TunnelVPS plan*

| Plan | Traffic a month | Price a month on 12 months | Sized for |
| --- | --- | --- | --- |
| Solo | 2 TB | $2.25 | One person |
| Duo | 5 TB | $5.25 | Two people |
| Home | 5 TB | $6.37 | A household |
| Crew | 5 TB | $10.12 | A small team |
| Fleet | 6 TB | $15.00 | A busy team |

## What happens near the monthly allowance?

**Nothing is charged automatically.** Every server has one dedicated IPv4 address and a routed IPv6 /64. Each plan states its monthly outbound traffic in TB, and going past it never adds an automatic charge. Still, a server close to its allowance each month needs a bigger plan or fewer heavy users.

The [traffic estimate page](https://tunnelvps.com/how-much-traffic-does-a-vpn-use/ "How much traffic does a personal VPN use in a month?") gives typical monthly figures by use. The [pricing page](https://tunnelvps.com/pricing/ "How much does a TunnelVPS VPN server cost?") lists every plan and rental length.

## How do you find the heaviest device?

**Compare the bytes sent per peer in the `transfer` output.** Each WireGuard peer has its own counter, which is one more reason to give every device its own key. A peer with a huge total is usually a streaming box or a backup job.

For a shared household, Outline keys can carry data limits. The [family sharing guide](https://tunnelvps.com/guides/how-to-share-your-vpn-server-with-family/ "How do I share a VPN server with my family?") covers limits and revocation, and is a good next read after learning how to monitor WireGuard traffic.

## Traffic monitoring questions

### Does wg show count traffic since boot?

Since the interface came up. Restarting `wg-quick@wg0` starts the counters again from zero.

### What is the best tool to monitor WireGuard traffic in 2026?

`wg show` for live, per-device numbers and vnStat for monthly totals. Both are in the Debian and Ubuntu repositories.

### Which direction counts against the TunnelVPS allowance?

Each plan states its monthly outbound traffic. Read the outbound (tx) column on the internet interface.

### Can I see which websites a device visits?

`wg show` and vnStat count bytes only. They show no destinations, and none are needed to manage traffic.

### Does vnStat slow the server down?

Its daemon reads interface counters, a light task even on Solo.

**Verdict**

- **`wg show` per device, vnStat per month**: two tools cover all of it.
- **Check the outbound total monthly** against the plan allowance.

## Sources

1. [wg(8) manual page](https://man7.org/linux/man-pages/man8/wg.8.html) — man7.org (read 2026-11-16)
2. [vnstat(1) manual page](https://manpages.debian.org/bookworm/vnstat/vnstat.1.en.html) — Debian (read 2026-11-16)
3. [Outline: get started (data limits per key)](https://getoutline.org/get-started/) — Outline Foundation (read 2026-11-16)

**Room for a household's traffic** Home includes 5 TB a month, at $6.37 a month on 12 months. [Order Home for 12 months](https://tunnelvps.com/app/checkout/?plan=home&term=12m&image=ubuntu-24.04&from=guides-how-to-monitor-wireguard-traffic&lang=en) · [Traffic estimate](https://tunnelvps.com/how-much-traffic-does-a-vpn-use/ "How much data does a VPN use in a month?")

---

TunnelVPS: TunnelVPS rents Linux KVM servers for a personal VPN (WireGuard, Outline or AmneziaWG) in New York, Dallas, Los Angeles, London, Amsterdam and Frankfurt, paid in crypto with no ID document. 5 plans from 2 to 16 GB of RAM and 2 to 6 TB of traffic a month cost the same in all six cities; on the 12-month term each is priced at least 25% under a named comparable plan of a no-KYC crypto host, read on 16 November 2026. The operator is DomaineGoat LLC, Panama.
